used machinery search | catagory | manufacturer | search
Search By Manufacturer
All Listings > 


sort by: best match | lowest to highest | highest to lowest
Used National Machine Listings
 
HOLZ-HER - 1265 5' X 12' VERTICAL PANEL SAW
Print Item
List Price: $6,500.00
Condition: ATFS
Machine Stock Number: 214045
Member Stock Number: SV030011065
Serial Number: 2258/8-85
DD: D

Description:
Holz-Her model 1265, 5' x 12' vertical panel saw, SN 2258/8-85, year 1988, 4HP 3-phase 220v motor, 12.2amps, SuperCut scoring device, pneumatic shifting grid, upper and lower full length calibrated gauge bars, two flip stops, flip down shelf for smaller parts, approximately 10 extra carbide tip blades, extra scoring knives, new bearings on saw carriage, as taken from service.
Click for Large Image
 Print Item

 
HOLZ-HER - 1424-300 TRIATHLON AUTOMATIC EDGE BANDER
Print Item
 
List Price: $14,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 7037
Member Stock Number: EB020008189
Serial Number: 4136
DD: D

Description:
Used Holz-Her Model 1424-300 "Triathlon" Automatic Edge Bander; having a maximum capacity of 1/2" solid wood banding and 3mm PVC banding materials; with 2-3/8" maximum panel thickness and 5-1/2" minimum panel length; equipped with a "1907" Granular glue system, hopper & "quick melt" feature with glue applicator nozzle; with a "1901" automatic magazine for coil material up to 3mm PVC (HD guillotine) and solid edge-banding strips up to 1/2"; "1926" pressure section with (1) large powered roller plus (2) additional pressure rollers; with a "1918" double motor end trim station; "1942" top and bottom rough flush trim unit; "1942M" top and bottom fine flush trim unit; "1927" top and bottom scraping unit; "1944" top and bottom buffing unit with plunge control; with a two speed feed motor delivering feed speeds of 26 or 52 FPM; automatic lubrication of conveyor chain, with a sound enclosure with interior lights over all milling units; with a PLC controller with ability to turn on program and retrieve function valves for work stations; with electrical controls wired for AC 3/60/230 volt operation and complete with a transformer to convert this unit to 440 volt operation; with manuals and all related equipment. Serial Number: 4136.
NOTE: A Doucet Model BT-36-60-T6-36-264-D Return Conveyor with 96" long x 36" wide receiving and 28 foot long x 36" wide return sections that was originally purchased for operation with this Edge Bander is available as well at an additional charge.
 Print Item

 
HOLZ-HER - 1402HF AUTOMATIC SINGLE SIDED EDGEBANDER
Print Item
2000
List Price: $9,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 214055
Member Stock Number: EB030011118
Serial Number: 2888
DD: C

Description:
Holz-Her model 1402HF automatic single sided edgebander, SN 2888, year 2000 (installed 2001), 5mm (3/16") maximum edgeband thickness capacity, 6-45mm panel thickness, 60mm minimum panel width, 180mm minimum panel length, cartridge glue system, feed magazine for coil material or pre-cut strips, 3-roll pressure section, left and right individually motorized trim station with two 0.3HP 9000rpm Hi-Freq motors, bevels from 0-15-degrees, top and bottom individually motorized flush trim units with two 0.9HP 18000rpm Hi-Freq motors, bevels from 0-15-degrees, 1940 top and bottom buffing units, two electronic thermostats, mechanical digital readouts where applicable, 36fpm feed speed, sound enclosure with window, fixed outboard panel support, original manual and parts list, one owner, cleaned and checked.
Click for Large Image
 Print Item

 
HOLZ-HER - 1408 EDGEBANDER
Print Item
List Price: $14,500.00
Condition: AS IS
Machine Stock Number: 50194
Member Stock Number: EB050000763
Serial Number:
DD: D

Description:
Holz-Her Edgebander
Model 1408
0.4-20mm capacity
End trim -0.55KW
Top & bottom trim belt driven 10KW
Top & bottom buff - 0.25KW
Pellet type glue system
Connected 220 V
3 Phase
60 Cy
Click for Large Image
 Print Item

 
HOLZ-HER - 1515 USED HOLZ-HER 1515 CASE CLAMP
Print Item
List Price: $4,995.00
Condition: ATFS
Machine Stock Number: 11688
Member Stock Number: CC070009239
Serial Number:
DD: D

Description:
Used Holz-Her Model 1515 Case Clamp. Approximately 100" x 50" x 24" wide clamp capacity. Vertical pressure beam with (3) clamping bars & horizontal top beam equipped with (4) clamping bars, total of (14) pressure cylinders, (2) each clamping bar. Vertical beam locks in place with air cylinders and rides on bearings for quick and easy positioning.
 Print Item

 
HOLZ-HER - 1255 VERTICAL PANEL SAW
Print Item
2005
List Price: $12,500.00
Condition: CLEANED/CHECKED
Machine Stock Number: 214037
Member Stock Number: SV030010933
Serial Number: 2138/0-412
DD: D

Description:
Holz-Her model 1255 vertical panel saw, SN 2318/0-412, year 2005, 14' x 6' horizontal and vertical cutting capacity, 2.5" maximum depth of cut, 250mm (9 7/8") diameter saw blade at 5390rpm, 5.5HP 3-phase 220v saw motor, "SuperCut" dual carbide knife scoring system, automatic moving grid, saw unit rotates 90-degrees for rip or cross-cutting, length stop, continuous workpiece support for cutting smaller pieces with adjustable stops, integral dust hood, four mechanical lift rollers, operation manual, cleaned and checked.
Click for Large Image
 Print Item

 
HOLZ-HER - MODEL 1528 DOUBLE SIDED CLAMP
Print Item
 
Condition: AS IS
Machine Stock Number: 1541
Member Stock Number: CC130008236
Serial Number:
DD: A

Description:
78" x 55" x 24" clamping capacity Serial no. 3099.
 Print Item

Displaying 7 Listing(s).



new machinery | used machinery search | catagory | manufacturer | search | about us | financing | wood words | contact us
West Coast Machinery - woodworking machinery for plants and shops. Sacramento, CA, West Coast Machinery services customers in central and northern California, southern Oregon and northern Nevada

West Coast Machinery - Sacramento,California - Phome: 916-383-5940 - Fax: 916-383-8370 - info@wcmachinery.com